All Motorola Tracfone Google FRP Bypass Android 12 July 2023

As of now, the Tracfone Motorola Android 12 devices are Moto G Pure, Moto G Power 2022/2023, Moto G Stylus 5G 2022/2023, Moto G 5G, Moto G Play 2023, etc.

After the latest Android security update, the old FRP bypass method no longer works. Now, we need a new trick to bypass the Google account verification on Motorola Tracfone Android 12 devices.

The FRP lock gets activated after a hard reset via Recovery Mode. Once the reset is done, you need to verify with the previously synced Google account to reach the home screen.

Let’s use the latest and easiest August 2023 trick to bypass the Google verification on all Motorola Android 12 devices as follows –

I was stuck on the Motorola Tracfone lock screen due to a forgotten password. To bypass the lock screen I did a factory reset via Android recovery.

Now, the reset is done and we are on the “Hi There” screen as shown above.

Let’s begin the setup with the “START” button.


In the next step, we are going to connect our device to the internet using Wifi or Mobile data.

Hit “Accept & Continue” in the next step.

Now, it takes a few minutes to get ready. The next page is “Copy apps & data”.

Click “Don’t copy” to move ahead.

Now, we are stuck on the screen lock verification page. To move ahead, we either need the lock screen password/pin/pattern or the previously synced Google account.

I do not remember these details. Let’s use the latest August 2023 hack to bypass the Google account verification on all Motorola Tracfone Android 12 devices as follows –

How to bypass Google account verification/FRP lock on all Motorola Tracfone Android 12 phones without PC August 2023 – Moto G Pure, Moto G Power, Moto G Stylus 5G, Moto G 5G, Moto G Play 2023

To bypass the Google FRP lock, let’s move back to the “START” screen.

Now, click on “Vision Settings” then “Talkback”.

Turn on the Talkback with the “Use Talkback” toggle.

Once Talkback is turned on, draw an opposite L on the screen. Swipe right then up as shown above.


A permission request appears – “Allow Android Accessibility Suite to record Audio?”. Double-tap “While using this app”.

Another pop-up appears – “Use voice commands to control Talkbalk”.

We need to launch the Google Assistant app with the voice command.

Double-click “Use voice commands” and say Google Assistant.

The Assistant window appears at the bottom.

Now, double-tap the keyboard icon at the bottom.

This brings you to the search box.

At this stage, we are going to disable Talkback with the volume keys.

Press and hold both the volume buttons for 3 seconds to enable the Talkback shortcut.

Again hold the volume keys until Talkback is turned off.


Now, type open youtube in the search box and choose the respective result to reach the Youtube app as shown above.

On Youtube click the “use profile icon” in the top-right corner.

Then click on “Settings” > “About”.

On the next screen, look for “Youtube Terms of Service” and click on it.

This brings us to the Google Chrome app.

Do the Chrome setup to get access to the search bar.

Now, search the term addrom bypass as shown above.

Select the first search result.


On the addrom website look for “Screen Smartlock” and click on it.

Now, we get 3 options – Pattern, PIN, & Password.

We can choose either of the three.

Let’s pick the first one.

Draw an easy pattern L.

Re-draw the pattern and hit “Confirm”.

It does nothing. We are again on the same screen.

Again click “Pattern” and try to set up the same pattern lock.


The app crashed. Now, click on “Close app”.

Again go back and open “Screen Smartlock”.

Tap the pattern and set up the same pattern L.

You have to keep trying to add this until you see the above screen that says – “Keep your device unlocked while it’s on you”.

You’ll get to this in a few tries. This confirms that the old screen lock is replaced with this new Pattern lock.

Now, click on “Yes I’m In”.

Let’s go back and use this new Pattern to bypass the Google account verification.

Keep hitting back until you reach the “START” screen.

Click “START” to move ahead.

Choose “Don’t copy” in the next step.

Now, we are on the pattern lock verification screen. The old lock screen password is replaced with a new pattern lock.

Draw the pattern L that we set earlier.

The Pattern verification is successful.

Use the “skip” option to bypass Google account sign-in.

Accept the Google services terms and conditions in the next step.

Again verify with the same pattern L.

Now, skip the fingerprint setup we can add it later.

Follow the on-screen prompts and keep moving ahead.


Finally hit “Done” to finish the setup wizard.

We successfully landed on the Motorola Tracfone Android 12 home screen thus bypassing the Google account verification.

If stuck at any step, feel free to leave a comment below.

Leave a Comment