LG Aristo KDZ Stock ROM/Firmware Update MS210 & M210 Tutorial

Usually, there are 4 reasons for going stock (Clean Unrooted State) –

  • To recover the phone from a bricked state (boot loop, stuck on firmware update screen etc)
  • Claiming Warranty
  • Selling the Phone
  • Firmware Update

With an unrooted phone no matter how bad you mess with it, a factory reset usually solves the problem.When the bootloader of a phone is locked there is nothing much to do. Thus it’s less prone to bricking.

But when the bootloader is unlocked, and the phone is rooted you’ve to do the things cautiously to avoid a brick. It’s always better to keep a backup of stock firmware to deal with such untoward incidents.

Below is an easy step by step guide to restore LG Aristo back to the factory state.

I’ve zipped the necessary files which include LG USB Drivers, LG aristo kdz file, LGUP software, and uppercut.

There is a DLL file available over the net for LGMS210 but it does not help LGUP in detecting the phone when connected in download mode. So uppercut is nothing but the replacement for the LG Aristo DLL file.  Please download the zip file from below download link and proceed with the tutorial –

DOWNLOAD

 

 

How to Flash LG Aristo Stock Firmware –

 

LG Aristo USB Driver Download

Extract the downloaded “LG Aristo MS210 Stock ROM.zip” file on your computer.

It contains the LG Aristo KDZ firmware file, LGUP Store Version Software, LG USB Driver & Uppercut.

LG Aristo USB Driver Installation

 

Install the LG USB Drivers if you haven’t yet installed on your computer

LG Aristo LGUP software

aristo lgup installation

Now install the “LGUP for store” program by clicking on the LGUP_Store.msi file as shown above.

 

 

LG Aristo Download Mode Firmware Update

After installing LGUP connect LG Aristo to the PC via USB cable in Download Mode.

To boot in download mode –

Turn OFF the phone

Connect one end of the USB cable to phone

Press the Volume Up Key. Keep it pressed, and connect the other end of USB Cable to PC. The phone will boot into download mode.

Wait till the USB drivers are getting installed.

lg aristo uppercut dll file replacement

lgup detected lg aristo

 

 

Once the driver installation is successful, Run Uppercut.

It would load the LGUP software as shown above.

lgup lgms210 flashing

You can see the phone model is showing up as LGMS210 with firmware version ms2101g.

By default, the flashing “Process” is set to “REFURBISH” we’ve to change it to “UPGRADE”

lgup lg aristo back to stock

18 thoughts on “LG Aristo KDZ Stock ROM/Firmware Update MS210 & M210 Tutorial

  1. O modelo do meu celular e ms210 paguei 1000 $$$ no meu celular e tô muito triste por que foi pra minha filha que adorou mas restauro o celular e tá na conta Google por favor me ajudem

  2. Não consigo tirar da conta Google aqui no Brasil comprei o celular e fui restaurar e não tenho a conta do 1 dono que mora no rio grande do sul e não tenho contato dele me ajudar por favor.

  3. en el ultimo paso ya para actualizar me dice
    Error: KDZ file is invalid.
    M210 -/ MS210
    que hago
    ya tengo mucho tiempo y no queda mi cel lg aristo, es de T mobile

Leave a Reply to Admin Cancel reply